首页>HART Series>HART/Industrial Ethernet gateway>GT200-HT-EI
  GT200-HT-EI
   
 
GT200-HT-EI
Description:
GT200-HT-EI can connect HART slave devices to the EtherNet/IP network and realize bi-directional data exchange easily.
 
Technical Specification:
 
  1. Support EtherNet/IP network is independent with HART network
2. Ethernet 10/100M self-adaptive
3. IP address conflict detection
4. Support ODVA standard EtherNet/IP communication protocol
5. Used as a primary or a secondary HART master
6. Supports single-point and multi-point mode at the HART side
7. Under single-point mode, support data burst operation
8. Supports one HART-channel, under multi-point mode, support connecting at most 13 HART slaves with gateway internal resistor and support connecting 15 HART slaves with an external resistor (250 ohm)
9. Supports all commands of the HART protocol
10. Each HART command can be configured for change-of-state output, polling output, initialization output or disable output
11. Supports up to 127 HART commands, HART output data buffer is up to 1000 bytes, and the input data buffer is up to 1600 bytes
12. Supports an internal or external HART sampling resistor
13. Power supply: 24VDC (11V-30V), 90mA (24VDC)
14. Operating Temp.: -40°F to 140°F (-40ºC to 60ºC), Rel. Humidity: 5%-95%, non-condensing
15. Dimension (W*H*D): 0.98in*3.94in*3.54in (25mm*100mm*90mm)
16. Installation: 1.38 in (35mm) DIN RAIL